Section 1 Running Ami Setup; Running Setup - American Megatrends Baby Voyager User Manual

Section 1
Running AMI Setup
The system parameters (such as amount of memory, disk drives,
video displays, and numeric coprocessors) are stored in CMOS RAM.
When the computer is turned off, a back-up battery provides power
to CMOS RAM, which retains the system parameters.
Each time the system is powered-on, it is configured with these
values, unless CMOS RAM has been corrupted. The AMI BIOS Setup
resides in the ROM BIOS (Read Only Memory Basic Input/Output
System) and is available each time the computer is turned on.
If, for some reason, CMOS RAM becomes corrupted, the system is
configured with the default values stored in this ROM file. There are
two sets of BIOS values stored in the ROM file: the BIOS Setup
default values and the Power-On default values.
R u n n i n g S e t u p R u n n i n g S e t u p
When POST has completed, the following message appears:
Hit <DEL> if you want to run SETUP
Press <Del> to run AMI Hi-Flex BIOS Setup.
46
Chapter 4 - AMI BIOS Features