Continued
Step 2 Install Memory,
I n s t a l l i n g S I M M s
I n s t a l l i n g
S I M M s
Both Bank 0 and Bank 1 have four SIMM sockets. These sockets can
be filled with 256 KB x 9, 1 MB x 9, or 4 MB x 9 SIMMs. Use only one
type of module to fill each bank.
Place the AMI 80486 Baby Voyager motherboard on an anti-static mat.
With the component side of the SIMM facing you, firmly push the
card into the socket. When properly inserted, the SIMM clicks into
place as the latching pins engage. See the following figure.
AMI Baby Voyager User's Guide
15