American Megatrends Baby Voyager User Manual page 84

Hard Disk Format,
Answer the questions on the screen. The first two questions are
already completed if one disk was selected in Standard CMOS Setup.
Enter C or D in Disk Drive and press <Enter>. If only one drive was
selected in Standard CMOS Setup, the cursor is on Interleave. The
Disk Drive Type is read from CMOS RAM. The Interleave factor can be
selected manually or determined by Auto Interleave.
The hard disk drive manufacturer usually provides a list of bad tracks.
Enter these tracks. They are then marked as bad to prevent data from
being stored on them.
The following screen is displayed after entering Y in Mark Bad Tracks,
pressing <Enter>, and selecting add, delete, revise, or clear from the
Bad Track Edit Menu.
H a r d D i s k U t i l i t y O p t i o n s H a r d D i s k U t i l i t y O p t i o n s
78
Continued
Chapter 4 - AMI BIOS Features