Specifications; Operation - American Dynamics SpeedDome Optima LT Installation Manual

Camera dome indoor pendant mounting structure
Hide thumbs Also See for SpeedDome Optima LT:
Table of Contents

Advertisement

Specifications

Operation

Manual pan speed ..................1–50° per second
Target pan speed....................100° per second max.
Pan travel ...............................360° continuous, no end
Manual tilt speed.....................1–50° per second.
Target tilt speed ......................50° per second max.
Tilt travel .................................>90°
Optical zoom...........................22X
Digital zoom ............................11X
Bubble density ........................Clear, f0
Tilt/Pan accuracy ....................±0.5°
Zoom/Focus accuracy ............±0.5%
Quick View™ access ..............< 2 seconds to pan and tilt
Synchronization ......................Automatically selected
Line locked .............................Remote V-phase
Internal....................................Built-in sync generator
Program storage .....................256K bytes of electrically
Data storage ...........................128kB of SRAM
Video output connector...........Female BNC
Product life..............................5 years operation
Color Camera Specifications
Type........................................Interline Transfer ¼" CCD
Scanning system ....................2:1 interlace
Horizontal resolution ............... 470 lines at center
Video out ................................1.0 Vp-p / 75 ohms
Signal/Noise ...........................48dB (typical)
Minimum illumination ..............1.5 lux (20 IRE)
Gain control ............................Automatic (AGC)
SPEEDDOME OPTIMA LT INDOOR PENDANT MOUNTING STRUCTURE
INSTALLATION GUIDE
stop
position
< 3 seconds to full zoom
position
< 1 second focus on
VM16 and VideoManager
controllers
< 7 seconds focus on
VM96 and RV2715
controllers.
adjustment
programmable Flash
Memory
500,000 position changes
array
composite
White balance ........................ Through the Lens (TTL)
NTSC version:
Pickup device.................. 768 (H) x 494 (V) pixels
Scanning ......................... 525 lines, 60 fields,
Horizontal........................ 15.734 kHz
Vertical ............................ 59.9Hz
PAL version:
Pickup device.................. 752 (H) x 582 (V) pixels
Scanning ......................... 625 lines, 50 fields,
Horizontal........................ 15.625 kHz
Vertical ............................ 50Hz
Lens
Design.................................... Aspherical
Focal length ........................... 4 to 64 mm
Aperture ................................. f1.4 (wide), f2.2 (tele)
Scanning area ........................ 3.2mm (H) x 2.4mm(V)
Viewing angle:
4 mm............................... 47.0°H x 35.2°V
48 mm ............................. 4.0°H x 2.25°V
Field-of-View Formulas:
3.2 mm* x distance from camera (m)
Focal length (mm)
2.4 mm** x distance from camera (m)
Focal length (mm)
* Horizontal scanning area of pickup device (mm) in camera.
** Vertical scanning area of pickup device (mm) in camera.
Example: Wide angle view with lens at 6mm and viewed
object at 10m.
3.2mm x 10m
= 5.33m Horizontal view (m)
6mm
2.4mm x 10m
= 4.0m Vertical view (m)
6mm
8 of 10
Automatic Tracing White
Balance (ATW)
30 frames
25 frames
= Horizontal view (m)
= Vertical view (m)
8200-0181-04, REV. B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents