American Dynamics ADTT16E Operator's Manual page 89

main monitor
menu
programming
mode
mode of
operation
monitor
multiplexer
Mux
non-
programmable
camera
normal state
operational mode
output
Output device
pan
pattern
Peel
Glossary
The monitor that displays the video that is being controlled by the primary
controller.
The controller state that allows you to display and select from the menu,
program the automatic system functions, indicate which external device your
system is connected to, and perform utilities.
The current operating condition of the controller. There are five operating
modes: camera control mode, menu/programming mode, sequencing mode,
alarm mode and Quest multiplexer control mode. The controller functions
differently depending on its current mode of operation. See also "operational
mode."
The screen where camera video is displayed. Some configurations include one
monitor; others include two monitors: a Main monitor and a Call monitor.
The unit that some ADTT16E systems are connected to. It enables you to see
video from up to 16 cameras simultaneously and select the monitor's display
format—full-screen, 2x2, 3x3, or 4x4 display. If the Quest multiplexer is
installed, additional display formats are available.
The LCD's abbreviation for "multiplexer."
A camera or dome, e.g., the SpeedDome NP, which does not have any
programmable features.
Describes the expected state of a device or expected result of a function. For
example, if a user sets the normal state of a door to be "closed", the door would
be in a "normal state" when it is closed and an "abnormal state" when it is open.
The current condition of the controller. There are four operational modes:
camera control mode, menu/programming mode, sequencing mode, and alarm
mode. The controller functions differently depending on its current operational
mode. See also "mode of operation."
A connection point on a hardware component that enables the system to control
output devices.
An auxiliary. A hardware component that can be controlled by the system.
Typical output devices include gates, door strikes, and lights.
Side to side camera movement.
A sequential series of pan, tilt, zoom, and focus movements from a single
programmable dome. You "teach" the dome a combination of these movements
that can be replayed automatically.
The TOUCH TRACKER button that enables you to initiate the SpeedDome
Apple Peel pattern.
Glossary-3