American Dynamics ADTT16E Operator's Manual page 38

Controlling a Camera's Pan and Tilt
Camera movement can be manually controlled once a camera is selected. Pan is the
side-to-side camera movement. Tilt is the up and down camera movement.
The Tracker Ball controls the pan and tilt movements. Move the Tracker Ball left and
right to pan the camera. Move the Tracker Ball towards you or away from you to tilt the
camera. Figure 3-4 illustrates how to control the pan and tilt movements.
Figure 3-4: Pan and tilt movement using the Tracker Ball
You can simultaneously pan and tilt the camera for diagonal movement. Moving the
Tracker Ball diagonally up and to the right moves the pointing direction of the camera up
and to the right. Figure 3-5 illustrates diagonal camera movement.
Figure 3-5: Diagonal camera movement using the Tracker Ball
Camera movement speed is directly proportional to the distance the Tracker Ball moves
from its center position. For example if the Tracker Ball moves slightly to the right, the
camera pans slowly to the right. As the Tracker Ball moves farther to the right, the panning
speed increases until maximum speed is reached.
Note:
Non-programmable domes provide two speeds: normal and fast.
3-8
Pan Left
Moves camera
up to left.
Moves camera
down to left.
This variable speed operation applies to programmable domes only.
Tilt Up
Pan Right
Tracker Ball
Tilt Down
Moves camera
up to right.
Moves camera
down to right.
ADTT16E Advanced Dome Controller Operator's Manual