American Dynamics ADTT16E Operator's Manual page 55

Sequence Programming Instructions
1. Press Menu.
2. Scroll through the menu until Define Sequence appears on the LCD. Press Zoom
or Focus to select. Information for the first event displays on the LCD. Continue with
step 4 to program this event. Otherwise, continue with step 3.
3. Move the Tracker Ball up or down to scroll to the event you want to define. If
necessary, press Clear to remove any previously programmed information.
4. Enter the camera number in the Cam field.
5. Move the cursor right to the Act field. Do one of the following:
Press View and enter the view number (1-96) to display a Quick View.
•
Press View and leave the number field blank to display a fixed shot.
•
Press Pattern and enter the pattern number (1-3) to run a Pattern.
•
6. Move the cursor right to the Dur field. Enter the event duration time (1 to 90 seconds).
7. Repeat steps 3 through 6 to program more events. When you complete defining the
Sequence, press the Menu button. This returns the controller to the camera control mode.
Programming Time Saver
To quickly start Controller Sequence programming, press Menu, and then press
Seq. Follow steps 3 through 7.
Programming Controller Functions 4-7