American Dynamics ADTT16E Operator's Manual page 18

Alarm Mode
The controller automatically goes into alarm mode whenever an alarm is triggered,
regardless of the operating mode. When the alarm mode is active, the controller beeps
intermittently until the alarm is cleared (either automatically or manually by pressing the
Clear button).
Alarms are configured using menu/programming mode. When configuring the alarm, you
determine what triggers the alarm and what actions occur in response to the alarm. The
following illustration shows an example of the controller LCD during alarm mode.
In the previous example, there are currently two alarms active. The alarm whose information
appears on the LCD was triggered by input 3 of camera 5. The video from camera 3 appears
on the Main monitor.
For more information about alarms, see Chapters 3 and 4.
Quest Multiplexer Control Mode
If the controller is configured to interface with the Quest triplex multiplexer, many advanced
features of the multiplexer can be accessed. When the controller is Quest Multiplexer control
mode, the controller can be used to access the multiplexer display formats, digital zoom,
freeze frame, and sequence features. The following controls are used:
A
B
C
D
Tracker
Ball
( )
Display
( )
Camera
or
Zoom
Focus
For more information about the Quest triplex multiplexer functions, see Chapter 5.
1-8
Displays the multiplexer sequence screens.
Toggles between multiplexer digital zoom and zoom area adjustment.
Toggles between freeze frame and freeze field mode.
Exits the current multiplexer mode.
Adjusts the position of highlighted window or zoom area.
Changes display format between the available multiplexer window
formats.
Assigns specific cameras to windows in multiplexer display format.
Selects the page to program for the selected multiplexer sequence.
Cam 3 Alarm2
Src:Cam 5 Inp3
ADTT16E Advanced Dome Controller Operator's Manual