American Dynamics ADTT16E Operator's Manual page 57

The blinking square on the LCD represents the cursor's location. Move the Tracker Ball up
and down to move between inputs for the selected camera. Move the Tracker Ball left and
right to move the cursor between the fields.
The controller keypad is also used during alarm programming. Figure 4-4 illustrates the
controller keypad; Table 4-4 describes which keys are used.
Figure 4-4: Controller keys used with alarm programming
Enter numbers
Clear field
Table 4-4: Keys used with alarm programming
Keys Used
Numeric keypad
Pattern
View
Previous
Next
Clear
Programming Controller Functions
A
B
Peel
1
Info
4
On
Output
Off
Menu
7
Clear
Iris
Open
Close
Description
Enters the alarm response camera, Quick View or Pattern, and the
triggered output numbers.
Changes the assigned action to a pattern.
Changes the assigned action to a Quick View or fixed shot. Leave
the View number blank for fixed shots.
Displays previous alarm camera in series for additional
programming.
Displays next alarm camera in series for additional programming.
Erases the information for the selected field. This allows the event
to be reprogrammed or skipped.
C
D
Flip
3
View
5 6
Pattern
Repeat
Pattern
8 9
0
Previous
Next
Assign Quick View
or fixed shot
Assign Pattern
Navigate to previous
or next camera for
programming.
4-9