American Dynamics AD1273 CobraDome Installation And Operation Instructions Manual page 33

AD1273
Keyboard Command
1 - 64 Set Shot
1 - 64 Call Shot
65 Call, then, 65 Set
66 Call, then, 66 Set
67 Set
67 Call
68 Call
69 Call
68 Set
71 Call, then, 69 Set
70 Set
71 Set
70 Call
71 Call
72 Call
Table 7 - Standard and Special AD1273 Control Commands
Dome Function
Set Preset 1 - 64
Goto Preset 1 - 64
Reset Dome
Auto-Iris Reset
(Iris Function)
Video Phase Adjust
(Pan Axis Function)
(Pan Axis Function)
Next Slowest
(Pan Axis Function)
AGC Enabled
AGC Disabled
Auto-Pan Setup
(Pan Axis Function)
(Iris Function)
Manual Iris
(Iris Function)
Auto-Pan Activation
(Pan Axis Function)
Flip
Next Slow
Auto-Iris
27
Dome Action
Saves Pan/Tilt position as preset 1 - 64
Moves Pan/Tilt to preset position 1 - 64
Recalibrates dome to original startup
position
Resets Iris to factory default settings
Toggles Video Phase Adjustment ON/OFF
Rotates camera 180° on the pan axis only
Acquires preset position in 4 seconds
Acquires preset position in 8 seconds
Turns Auto Gain Control (AGC) ON
(Color Cameras Only)
Turns Auto Gain Control (AGC) OFF
(Color Cameras Only)
Saves start position of Auto-Pan Sweep
Saves end position of Auto-Pan Sweep
Enables Auto-Iris
(Turns AGC on automatically when using
a color camera)
Enables Manual Iris
Starts Auto-Pan operation
OPERATION