American Dynamics SpeedDome Optima Quick Reference Manual page 7

AD168 Matrix Switcher/
Controller System
See Supported AD Keyboards for button names
used on specific keyboards.
Dome Function
Define Pattern # 1
Define Pattern # 2
Define Pattern # 3
End Pattern Definition
Save New Pattern
Go to Pattern # 1
Go to Pattern # 2
Go to Pattern # 3
Run Pattern # 1
Run Pattern # 2
Run Pattern # 3
Auto Repeat Pattern # 1
Auto Repeat Pattern # 2
Auto Repeat Pattern # 3
Clear Pattern # 1
(SpeedDome RS-422)
Clear Pattern # 2
(SpeedDome RS-422)
Clear Pattern # 3
(SpeedDome RS-422)
Flip (Rotate dome 180º)
Reset Iris
Return to Auto Iris / Auto
Focus
Reset Dome
Enter Vertical Phase
Adjust Mode
Exit Vertical Phase Adjust
Mode
In addition, the following commands are not
supported:
• Set Auxiliary 4 OFF (70-F1)
• Set Auxiliary 4 ON (71-F1)
RASO AND RASI SERIES SPEEDDOME OPTIMA
QUICK REFERENCE GUIDE
Keyboard Command
121 - F2
122 - F2
123 - F2
120 - F2
130 - F2
31 - F1
32 - F1
33 - F1
21 - F1
22 - F1
23 - F1
41 - F1
42 - F1
43 - F1
131 - F2
132 - F2
133 - F2
19 - F1
20 - F1
69 - F1
30 - F1
38 - F2
39 - F2
7 of 8
Manchester Commands
These commands are supported by systems using
the Manchester protocol.
See Supported AD Keyboards for button names
used on specific keyboards.
Verified with AD2050, AD2091, and AD168 with CCM
(v. 3.01)
Dome Function
Program Presets 1 - 64
Call Presets 1 - 64
Program Pattern 1
Program Pattern 2
Program Pattern 3
Save Pattern
Programming
Cancel Pattern
Programming
Repeats following pattern
Run Pattern 1
Run Pattern 2
Run Pattern 3
Reset Dome
Resume Auto Focus / Auto
Iris
Flip (Rotate dome 180º)
Activate / Deactivate
V-phase delay setting
adjustment
Keyboard Command
1- 64 Set Preset
1- 64 Call Preset
70 Set Preset
71 Set Preset
72 Set Preset
69 Set Preset
68 Set Preset
69 Call Preset
70 Call Preset
71 Call Preset
72 Call Preset
65 Set Preset
66 Call Preset
67 Call Preset
67 Set Preset
8000-2692-13, REV. C