Installing The Canopy; Installing The Blades - Hunter Overture Installation Manual

1886
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
Put the blade washers found in the
hardware bag onto the blade
screws found in the hardware
bag. Then install the blade screws
to secure each blade to the fan.
Repeat x3
Canopy Blades
x2
Canopy Screw
bag
x9
bag
Blade Screw
x9
Blade Washer
bag
Light Glass/Bulbs Remote