Installing The Ceiling Bracket - Hunter Overture Installation Manual

OFF
Do this first!
WARNING
To reduce the risk of fire, electrical shock, or personal injury,
mount fan directly from building structure and/or an outlet box
marked acceptable for fan support of 70 lbs (31.8 kg) and use the
mounting screws provided with the outlet box.
You have two options for installation. Pick which one works best for your location. Remove any existing
bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan's box.
Option 1:
Machine Screws
Use machine screws
(provided with outlet box)
and washers when securing
to existing ceiling fan-rated
outlet box. Make sure it is
securely installed and is
acceptable for fan support of
31.8 kg (70 lbs) or less.
For angled ceilings,
point opening
toward peak.
Ceiling Bracket Downrod
Installing the Secondary Hanging System
Remove the lag bolt, metal
washer, and plastic washer
from the bag. Thread
the lag bolt through the
metal washer and then the
plastic washer.

Installing the Ceiling Bracket

Hanging Fan Wiring
Drill a 5/32" pilot hole through
the Ceiling Fan Rated outlet box
and into the support structure.
NOTICE
Do you have an exposed support structure?
Go to www.HunterFan.com/FAQs and click
"Where do I connect the cable to?
Canopy Blades
Using a hex head ratchet socket wrench, screw
the lag bolt and washers found in the bag
into the pilot hole. Leave 3 mm (1/8") of space
between the outlet box and the plastic washer.
NOTE: Completion of hanging
system is on pg 5
Hunter Pro Tip:
The machine screws are the ones
that came with your outlet box.
Option 2:
Wood Screws
Use wood screws and
washers (included) when
securing to support structure
with approved electrical
outlet box. Drill 9/64" pilot
holes in support structure
to aid in securing ceiling
bracket with hardware found
in the hardware bag.
Light Glass/Bulbs
1886
bag
x1
Lag Bolt
Plastic
x1
x1
Washer
Washer
x2
Washer
bag
x2
Wood Screw
4
Remote