4Th System Option Code - DSC PC2550 Installation Manual

[5] Home-Away with Delay Options
On = Home-Away with Delay.
All zones programmed as Home-Away will have an Entry
Delay if a Delay Zone is activated while the system is
armed. The Home-Away zones will have an Exit Delay if
they are activated using the [ ][1] command.
* Off = Home-Away as Interior.
All zones programmed as Home-Away types will not be
subject to the Entry or Exit Delays. When the Home-
Away zones are armed, any activity on the zones will
generate an immediate alarm. These zones will not have
an Exit Delay if they are activated using the [ ][1]
command.
[6] Auxiliary Delay Zones Force Arming Option
On = Force Arm on Auxiliary Delay.
The system may be armed with Auxiliary Delay Zones
being left open. When the system is armed, the Auxiliary
Delay Zones will be bypassed. When the zones are
secured, they will be added to the system and will be
armed. Once armed, activity on an Auxiliary Delay Zone
will initiate the Auxiliary Entry Delay.
* Off = Auxiliary Delay Normal.
If an Auxiliary Delay Zone is left open when the system is
armed, the Auxiliary Entry Delay will begin as soon as the
Exit Delay expires. If the system is not disarmed before
the Auxiliary Entry Delay expires, an alarm will be
generated.
[7] Transmission Limit Reset Options
On = Transmissions Limited to 24-hour Period.
The Swinger Shutdown counter will be reset when the
system time changes from 23:59 (11:59 pm) to 00:00
(12:00 am).
* Off=Transmissions Limited to Armed Period.
The Swinger Shutdown counter will be reset when the
system is next armed.
The Swinger Shutdown counter is used to limit the
number of alarms each zone may transmit. When a zone
has generated the set number of alarms, any further
alarms will be ignored and will not be transmitted. When
the Swinger Shutdown counter is reset, zones that had
been "shut down" after transmitting the set number of
alarms will again be able to transmit alarms.
[8] Bypass Status Display Options
On = Show Bypass Status While Armed.
The "Bypass" light will be ON while the system is armed
to indicate that there are bypassed zones on the system.
* Off = Show Bypass Status While Disarmed Only.
The "Bypass" light will be ON only while the system is
disarmed to indicate that there are bypassed zones on
the system. When the system is armed, the "Bypass"
light will be shut OFF.
* is default condition.

[18] 4th System Option Code

[1] Quick Exit Enable/ Disable
On = Quick Exit Enabled.
With the system armed in the Home-Away mode, users
may enter the [ ][0] command to allow a single delay
zone to be activated so they may leave the premises.
Only one delay zone may be activated; any additional
activity on another delay zone will generate an alarm. If
the delay zone is still open 2 minutes after the [ ][0]
command is entered, the Entry Delay will be initiated.
* Off = Quick Exit Disabled.
Note: Quick exit shall not be enabled on UL listed
systems.
[2] Bell Pulse Options
On = Bell Pulses Always.
The bell or siren will pulse for all types of audible alarms.
* Off = Bell Pulses for Fire Alarm Only.
The bell or siren will pulse for Fire and [F] key alarms. For
all other audible alarms, the bell or siren will sound a
steady alarm.
[3] Bypassed Zone Display Options
On = Show Bypassed Zones Always.
The zone lights of bypassed zones will come ON upon
expiry of the Exit Delay as well as when the [ ][1]
command is executed in the disarmed state.
* Off = Show Bypassed Zones While Disarmed Only.
The zone lights will only come ON when the [ ][1]
command is executed in the disarmed state.
Note: If Alarms Displayed While Armed is enabled,
bypassed zones will not be displayed while the
system is armed.
[4] 2-minute Keypad Time-out Enabled / Disabled
On = 2-minute Keypad Time-out Enabled.
If no keys are pressed for 2 minutes, all keypad lights will
be shut OFF.
* Off = No Keypad Time-out.
The keypad lights will not be shut OFF.
Note: This feature must not be used with an LCD
keypad or an Escort.
[5] Partial Closing Reporting Option
On = Partial Close on Auto-arm.
When the system is armed with open zones, the system
will transmit the Partial Closing Code, the Alarm
Reporting Codes for the Force-Armed zones, and the
User Closing Code.
* Off = No Partial Close on Auto-arm.
The system will transmit only the User 1 Closing Code
even though zones were force armed.
[6] [P] Key Keypad Sounder Options
On = Keypad [P]anic Silent Buzzer.
When a [P] key alarm is generated, the keypad sounder
will not beep to acknowledge the alarm.
19