Installation: Product Specifications - Scotsman C0322 Installation And User Manual

Modular cuber
Hide thumbs Also See for C0322:
Table of Contents

Advertisement

C0322 through C1030
Air and Water Cooled User Manual

Installation: Product Specifications

Location Limitations:
The product is designed to be installed indoors, in
a controlled environment. Air cooled models
discharge very warm air into the room out the back.
Space must be allowed at the left side and back for
air intake and discharge. Water cooled models
discharge warm water into the building's drain.
Space needs to be provided on both sides and
above for service access.
Space Limitations
Note: Although the machine will function, ice
capacity of air cooled machines will be significantly
reduced with minimal clearance at the sides, back
and top. Some space is recommended for service
and maintenance purposes on all models.
6" of space at the sides and back are required for
adequate operation. To get the most capacity,
locate the machine away from heat producing
appliances and heating ducts, and keep the left
side away from any wall, allow 12-18 inches of
space for good air flow
Airflow is in the left side, out the back (as viewed
from the front).
Air Flow
Environmental Limitations
Air
temperature
Water
temperature
Water
pressure
Power supply – acceptable voltage ranges
115 volt model
230 volt model
Warranty Information
The warranty statement for this product is provided
separately from this manual. Refer to it for
applicable coverage. In general warranty covers
defects in material or workmanship. It does not
cover maintenance, corrections to installations, or
situations when the machine is operated in
circumstances that exceed the limitations printed
above.
Product Information
The product is a modular cuber. That type of
machine is designed to be placed on an ice
storage bin or an ice dispenser. Many installations
only require the matching bin, but some also
require an adapter to be placed between the bin
and the cuber or between the dispenser and the
cuber. This product cannot be stacked. See the
chart for application information.
May 2007
Page 2
Minimum
Maximum
o
o
50
F.
100
F.
o
o
40
F.
100
F.
20 psi
80 psi
Minimum
Maximum
104 volts
126 volts
198 volts
253 volts

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C0522C0330C0530C0630C0830C1030

Table of Contents