Scotsman C0322 Installation And User Manual page 19

Modular cuber
Hide thumbs Also See for C0322:
Table of Contents

Advertisement

C0322 through C1030
Air and Water Cooled User Manual
13. Remove water distributor from ice machine.
Inspect distributor for restricted orifice holes.
Be sure all holes are fully open.
Squeeze Tabs Together, Slide Out Until it Stops,
Then Lift to Remove
Remove Water Distributor
Inspect Orifice Holes
Inspect Water Distributor
14. Locate ice thickness sensor. Squeeze
mounting legs together to release sensor.
Wash the metal surfaces of the sensor and the
adjustment screw with ice machine scale
remover solution. Also wash the water
distributor and curtain with the ice machine
cleaner solution.
15. Locate water level sensor. Squeeze catches
together and pull up to remove sensor. Wash
metal surfaces of sensor with ice machine
scale remover solution.
16. Mix a solution of sanitizer.
Note: A possible sanitizing solution may be made
by mixing 1 ounce of liquid household bleach with 2
gallons of warm (95-115
17. Thoroughly wash all surfaces of the ice
thickness sensor, water level sensor, curtain
and water distributor with the sanitizer solution.
o
F.) potable water.
18. Wash all interior surfaces of the freezing
compartment, including evaporator cover and
right side panel liner with the sanitizer solution.
19. Return water level sensor, ice thickness
sensor, water distributor and curtain to their
normal positions.
20. Push and hold the clean button to drain the
reservoir. Push and release the clean button
again and when the purge valve indicator light
goes out, immediately pour the remaining
cleaning solution into the reservoir.
21. Circulate the sanitizer solution for 10 minutes,
then push and release the Clean button.
22. Allow the water system to be flushed of
sanitizer for at least 20 minutes, then push and
release the Off button.
23. Return the evaporator cover and front panel to
their normal position and secure with the
original fasteners.
24. Push and release the On button to resume ice
making.
Ice Storage Bin
1. Remove and discard all ice.
2. Mix a solution of 7 ounces of Scotsman Clear 1
ice machine scale remover in 84 ounces of
potable water and wash all interior surfaces of
the ice storage bin to remove any mineral scale
build up. Pour excess cleaner solution into the
bin's drain.
3. Mix a solution of sanitizer and thoroughly wash
all interior surfaces of the ice storage bin. Pour
excess sanitizer solution into the bin's drain.
July 2006
Page 18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C0522C0330C0530C0630C0830C1030

Table of Contents