Setting Up The Addressright 300 Feeder - Pitney Bowes AddressRight 300 User Manual

Front Panel
1. Power Receptacle: Plug in the power cord here. Make sure that the power cord is only plugged
into a properly grounded receptacle.
2. On/Off Switch: Controls power to the feeder
3. Fuse Holder: The fuse protects the electronics and motor in the feeder
4. Interface Connector: Can be used to control the feeder

Setting Up the AddressRight 300 Feeder

1. Release the separator locking lever. Raise the separators and lock in position.
Pitney Bowes User Guide October 2019 4