Operation; To Switch On The Product; Operating Modes - Husqvarna AUTOMOWER 435X AWD Operator's Manual

4.1 To switch on the product

WARNING:
safety chapter before you switch on the
product.
WARNING:
away from the rotating blades. Do not put
your hands or feet near or below the product
when the cutting motor is running.
WARNING:
when persons, especially children, or
animals are in the work area.
1. Push the jog wheel for 3 seconds to switch on the
product.
3 sec
Note:
Make sure that the STOP button is
pushed down. If the STOP button is not pushed
down a STOP symbol will show on the display.
2. Use the jog wheel to enter the PIN code. The
correct PIN code must be entered to get access to
the menu. If the incorrect PIN code is entered 5
times, the product is locked for a time. The lock is
extended for each new incorrect try.
3. Select the desired operating mode and push the
Operating modes on page 34 .
jog wheel. Refer to
4. Push the START button to start the product.

34 - Operation

4 Operation
Read and understand the
Keep your hands and feet
Do not use the product
If the product is parked in the charging station, it
will only leave the charging station when the
battery is fully charged and if the
let the product operate.

4.2 Operating modes

®
In the Automower Access menu the following operation
modes can be selected:
• Main area
• Secondary area
• Park
4.2.1 Main area
Main area is the standard operating mode where the
product mows and charges automatically.
4.2.2 Secondary area
To mow secondary areas the operating mode
Secondary area must be selected. In this mode, the
operator must move the product manually between the
main area and the secondary area. The product mows
for a selected period of time or until the battery is empty.
4.2.3 Park
Park mode is selected the following operation
When the
selections can be chosen:
• Park until further notice
• Park for a specific number of hours
Menu structure overview in Automower
Refer to
Access on page 8 .
4.2.3.1 Park until further notice
The product goes to the charging station where it stays
until you select a different operating mode.
Schedule is set to
®
1404 - 006 - 05.01.2021