To Start The Product For The First Time; Settings In Automower ® Connect - Husqvarna AUTOMOWER 435X AWD Operator's Manual

3.10.9 User interface overview
The user interface overview below shows examples of Automower
®
Automower Access.
®
Automower Connect
My Automower R
6
MOWING
Mowing session ends 13:30
PARK PAUSE
Schedule Map
®
Automower Access
6
3.11 To start the product for the first
time
When the product is switched on for the first time, there
are some basic settings to do before the product can
start to operate.
1. Push the jog wheel for 3 seconds to switch on the
product.
Note:
The Bluetooth ®
minutes. If the product does not pair with
Bluetooth ® in 3 minutes, switch off the product.
Wait until the LED status indicator is not lit, and
then switch on the product again.
2. Enter the factory PIN code.
3. Log on to your Husqvarna account in the
®
Automower Connect app to pair your product with
®
Automower Connect.
Note:
It is recommended to pair your product
®
with Automower Connect to get access to all
28 - Installation
My Automower R
6
PARKED
Next start tomorrow 16:30
PARK START
Schedule Map
6
P
pairing mode is on for 3
®
Connect and the corresponding display in
My Automower R
6
PAUSED
Ends 13:30
PARK START
Schedule Map
6
functions in the product. If it is not necessary to
pair your product with Automower
arrow symbol to continue to the menu.
the
4. Start Bluetooth ® on your mobile device.
My mowers in the Automower
5. Select
app, and then select the plus sign (+).
6. Select model. The Automower
searches for available products within short-range
®
(Bluetooth ).
7. Select product.
8. Obey the instructions in the Automower
app.
3.12 Settings in Automower
The product has factory settings but the settings can be
adapted to each work area.
My Automower R
6
ERROR
Charging station Blocked
MORE DETAILS
Schedule Map
6
®
Connect, push
®
Connect
®
Connect app
®
Connect
®
Connect
1404 - 006 - 05.01.2021