To Display The Dvd Mode Screen; If A Menu Screen Appears; Playing Still Frames (Pausing); Finding The Beginnings Of Chapters Or Tracks - Alpine Vehiclehub Pro VPA-B222 Owner's Manual

To display the DVD mode screen

To watch a video source, your vehicle must be parked with the ignition
key in the ACC or ON position. To do this, follow the procedure below.
1 Push the foot brake to bring your vehicle to a complete
stop at a safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 While the parking brake is being engaged the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD mode, as
long as the car's ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of "To display the DVD mode
screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the DVD mode screen."
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
Caution
• Not all functions will operate for every DVD. See the
individual DVD's instructions for details on the
features supported.
• If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Press the joystick up or down to select the DVD
mode (EXT.DVD or DVD CHANGER, etc.), then press
/ /ENTER.
Playback starts.

If a menu screen appears

On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. The DVD menu can be controlled by the
commander supplied with the unit. If this happens, perform the
operation described below to start playback.
Press the joystick up, down, left or right to select an
item, then press and hold
2 seconds.
• Press MUTE/RTN/SETUP to return to the previous screen.
• The Video CD menu screen cannot be controlled from the
commander supplied with the unit.
• Depending on the disc, the menu screen may be recalled from the
FUNCTION screen. Select MENU on the FUNCTION screen and
press / /ENTER to recall the menu, after displaying the
FUNCTION screen by pressing and holding
at least 2 seconds.
20
-EN
/ /ENTER for at least
/MENU/FUNC. for

Playing Still Frames (Pausing)

1
During playback, press
2
Press / /ENTER to resume playback.
Finding the Beginnings of Chapters or
Tracks
During playback, press
The chapter/track switches each time the button is pressed, and
playback of the selected chapter/track starts.
: Press this to start playback from the beginning of the
following chapter or track.
: Press this to start playback from the beginning of the
current chapter or track.
• Some DVDs do not have chapters.
Supplementary explanation
"Chapters" are divisions of movies or musical selections on
DVDs.
"Tracks" are divisions of movies or musical selections on
video and music CDs.

Fast-forwarding/Fast-reversing

1
During playback, press and hold
or (fast-forward).
2
Release or
/ /ENTER.
or .
(fast-reverse)
to return to normal playback.