Checking The Sat Radio Id Number; Storing Channel Presets; Receiving Stored Channels - Alpine Vehiclehub Pro VPA-B222 Owner's Manual

SIRIUS Radio:
1
* Channel name, category, song name, etc., are displayed in one
screen.
2
* XM mode only: The information display appears when ON is set in
"Setting the Auxiliary Data Field Display" (page 17).

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
XM Radio:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
It can also be displayed on the screen of the VPA-B222 in the following
way.
1
Press / /ENTER to select the channel number
turing mode.
2
While receiving a SAT Radio band, press
to select channel "0" for XM, or to select
channel "255" for SIRIUS.
3
The unit displays the ID number.
4
To cancel the ID number display, change the
channel.
• You cannot use "O," "S," " I," or "F" for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
24
-EN

Storing Channel Presets

1
Press and hold
seconds after selecting a desired band.
The FUNCTION screen is displayed.
2
Press the joystick up or down to select PRESET
MEMORY, then press the joystick right.
3
Press the joystick up or down to select any one of
the preset numbers PRESET1 through PRESET6,
then press
The selected station is stored.
4
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM-1, XM-2 and XM-3 or
SIRIUS-1, SIRIUS-2 and SIRIUS-3).
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.

Receiving Stored Channels

1
Press and hold
until the desired band is displayed.
2
Press and hold
seconds.
or
The FUNCTION screen is displayed.
3
Press the joystick up or down to select PRESET
CALL, then press the joystick right.
4
Press the joystick up or down to select any one of
the preset numbers PRESET1 through PRESET6,
then press
The selected station is received.
• During reception, you can change the station by pressing
/MENU/FUNC. for at least 2
/ /ENTER.
for at least 2 seconds repeatedly
/MENU/FUNC. for at least 2
/ /ENTER.
or .