Adjusting The Display Position; Setting The Auxiliary Data Field Display; Cd/Mp3/Wma Operation (Optional); Playing Cd/Mp3/Wma - Alpine Vehiclehub Pro VPA-B222 Owner's Manual

Adjusting the display position

Depending on the connected monitor, the display may move out of
position. During touch panel operation, if the position between the
display on the LCD and the display of the touch panel does not match,
adjust the display position.
Setting items: SCREEN ADJ
Setting content:
Adjustment if a monitor not compatible with touch panel
operation is connected.
The screen position within the display is adjustable. The position is
controlled from the commander.
1 In the SCREEN ADJ mode, press the joystick right.
The adjustment screen appears.
2 Press the joystick up, down, left or right to adjust the
display position.
3 Press / /ENTER.
The adjustment is complete, and the display returns to
the main source screen.
Adjustment if a touch panel compatible monitor is connected.
The screen and soft button positions are adjustable within the
display. The position is controlled from the soft buttons.
1 Touch [ ] of SCREEN ADJ.
2 Touch [ ], [ ], [ ] or [
and touch [ENT].
The TOUCH LOCATE screen is displayed.
3 Touch the center the
the screen.
The screen changes to the adjustment screen.
4 Touch the center of the
right of the screen, then touch [ENT].
The adjustment is complete, and the display returns to
the main source screen.

Setting the Auxiliary Data Field Display

This display can be used only when the optional XM Satellite Radio
Receiver is connected.
Setting item: ADF
Setting content: OFF/ON
ON: The Auxiliary Data Field is displayed in the XM mode.
OFF: The Auxiliary Data Field is not displayed.
] to adjust the display position,
mark displayed in the lower left of
mark displayed in the upper
CD/MP3/WMA
Operation
(Optional)
Display example for MP3/WMA main screen
Disc number display
Folder number display
File number display

Playing CD/MP3/WMA

1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Press the joystick up or down to select the CD/MP3/
WMA mode (CD CHANGER, etc.), then press
ENTER.
3
Press and hold or
select a disc (when a changer is connected).
4
While playing back MP3/WMA. Press
select the desired folder.
Joystick
/
for at least 2 seconds to
or to
17
-EN
/