Settings For External Editors; Time Code Settings For Recorder; Vtr Constant Settings For External Editors - Sony DNW-A220 Maintenance Manual

1-16. Settings for External Editors

1-16. Settings for External Editors

1-16-1. Time Code Settings for Recorder

When editing with an editor capable of the 1st-edit (BVE-2000)
. Time code operation block on the control panel
INT/EXT switch
PRESET/REGEN switch
F-RUN/R-RUN switch
When editing directly from VTR to VTR
n
Make sure that the setting of ITEM-610 on the setup menu is as follows;
. ITEM-610: REGEN CONTROL MODE 8
. Time code operation block on the control panel
INT/EXT switch
PRESET/REGEN switch
F-RUN/R-RUN switch

1-16-2. VTR Constant Settings for External Editors

The following constants are standard for each type and system listed.
When using an external editor which requires the VTR constants, use the settings listed. VTR constants
must also be set when switching between the 525 and 625 line systems.
Type / System
Player : 525/60 system
Player : 625/50 system
Recorder : 525/60 system
Recorder :625/50 system
m
1. Set the data No. 8 of VTR CONSTANT 1 to 0A for the following editors.
. BVE-900 ROM version 1.08 or lower
. BVE-600 ROM version 1.01 or lower
2. If the unit is controlled by the editor, be sure to set ITEM-401 on the setup menu as follows;
. ITEM-401: FUNCTION MODE AFTER CUE-UP
1-46
8 INT
8 PRESET
8 F-RUN
0: auto edit
8 INT
8 PRESET
8 R-RUN
VTR CONSTANT 1
Data No.
1 2 3 4 5 6
B0 4C 00 96 07 07 04 8B
B1 4C 00 7D 07 07 04 8B
B0 4A 00 96 07 07 04 8B
B1 4A 00 7D 07 07 04 8B
VTR CONSTANT 2
Data No.
7 8 1 2 3 4 5
0A 08 FB 00 8D 3D FF 4C
0A 07 FB 00 8F 4B FF 4C
0A 08 FB 00 8D 3D FF 4C
0A 07 FB 00 8F 4B FF 4C
Values are represented in hexadecimal
8 0: stop
6 7 8
DNW-A220
DNW-A220P