Canon CR-N500 Settings Manual page 90

B102 Client connection denied [notice]
Description %1 request denied[%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to an
authentication error (41), time
specification error (42), insufficient
resource (43), specification of
unsupported codec (45), specification
of unpermitted user level (47), too many
clients (49) or invalid operation mode
(4a).
Countermeasure 41: Check user name, password or user
list used when connecting.
42: Check playtime or maximum
connection time settings used when
connecting.
43: Reconnect or restart.
45: Use supported client software.
47: Check user level used when
connecting.
49: Check client number settings.
4a: Check if usage of audio server is
enabled.
B103 Client forcibly disconnected [notice]
Description %1 access denied[%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 42 | 4a)
Meaning Connection was initially permitted, but
the setting has subsequently been
changed to prohibit access, thereby
triggering a forced disconnection (the
denial type is the same with B102).

Camera application notification
C001 Camera control module started/
stopped [info]
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
C002 Camera application started/stopped
[info]
Description starting cameraappl (C002)
Meaning The camera application started.

Video notification
V001 Video server started/stopped [info]
Description
%1
Meaning

Standard communication (IP)
notification
D001 Standard communication (IP)
notification started/stopped [info]
Description
%1
Meaning

RTP notification
R001 RTP started/stopped [info]
Description
%1
Meaning
R002 RTSP PLAY request received [info]
Description
%1
%2
Meaning
R003 RTSP TEARDOWN request received
[info]
Description
%1
%2
Meaning
90
%1 video (V001)
Starting or stopping
The video server started/stopped.
%1 Standard Com (D001)
Starting or stopping
The standard communication (IP)
started/stopped.
%1 RTP (R001)
Starting or stopping
The RTP started/stopped.
PLAY received: client_IP=%1,
num_of_sessions=%2 (R002)
Client IP address
• Displays "HTTP tunneling connection"
if the streaming protocol is HTTP
tunneling.
Total number of client sessions
RTSP PLAY request was received.
TEARDOWN received: client_IP=%1,
num_of_sessions=%2 (R003)
Client IP address
• Displays "HTTP tunneling connection"
if the streaming protocol is HTTP
tunneling.
Total number of client sessions
RTSP TEARDOWN request was
received.