Table of Contents
Advertisement
(4)
,
,
,
, HOME button
Press
or
button to change the camera angle in the tilt direction, or press
camera angle in the pan direction.
Press the HOME button to return the camera angle to the front (home position).
(5) CAMERA SELECT
Press the number of the camera wanting to operate with the IR remote controller.
Use the SERVICE switch on the back of the camera to set the camera number.
Note
If there is a camera set to the same camera number nearby, the IR remote controller may operate the cameras simultaneously.
It is recommended to use a different camera number for cameras installed nearby.
For details on setting the camera number, refer to "Installation Guide/Important Information".
(6) ZOOM
Press the T button to zoom in (telephoto), and the W button to zoom out (wide angle).
(7) ZOOMSPEED
Adjusts the zoom speed.
Press the FAST button to increase the operating speed or the SLOW button to decrease it.
(8) OPTION button
Not supported (for future expansion).
(9) P/T SPEED
Adjusts the pan/tilt speed.
Press the FAST button to increase the operating speed or the SLOW button to decrease it.
(10) PAN DIRECT.
Press the REV. button to reverse the panning direction.
Press the STD button to return to the original direction.
(11) FOCUS, MF/AF
Use for focusing.
Press the AF button to adjust the focus automatically. To adjust the focus manually, press the MF button, then
the F (FAR) button and the N (NEAR) button to adjust.
80
or
button to change the
Hide quick links:
Advertisement
Table of Contents
