[System] > [Security] > [Ssl/Tls]; Encrypted Communications; Server Certificate - Canon CR-N500 Settings Manual

[System] > [Security] > [SSL/TLS]
Settings for encrypted communications and server certificates.

Encrypted Communications

Settings for encrypted communications.
[HTTPS Connection Policy]
Set SSL/TLS communication with HTTPS connections.
Select [HTTP] if SSL/TLS communication is not performed.
Select [HTTPS] or [HTTP and HTTPS] to perform SSL/TLS communication. Connections using SSL/TLS are enabled after
rebooting.
If [HTTPS] is selected, HTTP access is also redirected to HTTPS to perform SSL/TLS communication.
Important
• Even if SSL/TLS communication is set to use here, SSL/TLS communication is not performed unless a certificate has not been installed.
• Video distribution performance decreases when performing SSL/TLS communication.

Server Certificate

Settings for server certificate for use.
[Server Certificates]
Select a certificate to use from the certificates registered in [System] > [Security] > [Certificate Management] > [Server
Certificate Management], and click [Select]. Follow the displayed messages to reboot. The created certificate takes effect
after a reboot.
[Certificate Validity Period]
Displays the validity period of the selected certificate.
Note
Depending on the server certificate used by the camera and the computer connected to the camera, it may be necessary to install the root
certificate, the intermediate CA certificate, or the certificate selected and exported in [Server Certificate List].
62