Image Quality Details Settings - Canon CR-N500 Settings Manual

Image Quality Details Settings

Detailed settings related to image quality.
[Sharpness:Level]
Adjust the level of edge enhancement.
[Sharpness:Limit]
Adjusts the level at which the edge enhancement is limited.
[Noise Reduction]
Selects setting method of noise filter to reduce noise.
When [Auto] is turned on, the noise reduction level is automatically set.
When [Auto] is turned off, it is possible to adjust the noise reduction level manually.
The higher the value, the greater the noise reduction effect.
[Black:Master Pedestal]
Adjusts the black level.
The higher the value, the vivid the dark area will be and less contrast. Decreasing the number makes the black levels flat.
When [Image Quality] > [Gamma] is set to [Canon Log3], it will not be displayed.
[Black:Master Black Red], [Black:Master Black Blue]
Corrects R and B individually for black color casts.
When [Image Quality] > [Gamma] is set to [Canon Log3], it will not be displayed.
[Black Gamma:Level], [Black Gamma:Range], [Black Gamma:Point]
Corrects gamma in shadow areas. By changing each value, the gamma curve on the black side within the range shown in
the figure below is adjusted.
– Level: Height from reference gamma
– Range: Width from the point
– Point: Vertex position
Point Point
Level Level
Range
Input
This function is disabled when [Image Quality] > [Gamma] is set to [Wide DR] or [Canon Log3].
[Knee:Active], [Knee:Automatic], [Knee:Slope], [Knee:Point], [Knee:Saturation]
Compresses the highlighted areas to suppress the occurrence of blown highlights.
– Active: Enables knee adjustment.
– Automatic: Enables automatic knee adjustment.
– Slope: Indicates the slope of the knee.
– Point: Indicates the knee point.
– Saturation: Adjusts the color intensity in the highlighted areas.
31