Canon CR-N500 Settings Manual page 89

S055 IPv6 address for wired LAN interface is
released [info]
Description IPv6 Address %1 %2 was released from
the wired I/F (S055)
%1 Released IPv6 address
%2 "from router" for DHCPv6/RA address
Meaning IPv6 address assigned to wired LAN is
released.
S056 IPv4 address for wireless LAN interface
is released [info]
Description IPv4 Address %s was released to the
wireless I/F (S056)
%1 Released IPv4 address
Meaning IPv4 address assigned to wireless LAN
is released.
S140 Wired LAN and wireless LAN interface
on the same subnet [notice]
Description same subnet ethernet interface and
wireless LAN interface (S140)
Meaning The wired and wireless LANs are
configured on the same subnet.

HTTP Server Notification
H001 System started/stopped [info]
Description %1 httpd (H001)
%1 Starting or stopping
Meaning HTTP Server started/stopped.
H145 Authentication failure [notice]
Description Authentication failed for %1, IP: %2
(H145)
%1 Implemented countermeasures against
URL XSS vulnerability (Equivalent to
ftpd)
%2 IP address
Meaning Authentication failed.

wvhttp notification
W001 System started/stopped [info]
Description %1 webview (W001)
%1 Starting or stopping
Meaning wvhttp server (webview) started/
stopped.
W030 Startup and shutdown of WebView
Livescope Client [info]
Description
%1
%2
Meaning
W031 Transmitted video data size [info]
Description
%1
Meaning
W103 Authentication failure [notice]
Description
Meaning

Audio server notification
B001 Audio server started/stopped [info]
Description
%1
Meaning
B101 Received unusual request [notice]
Description
%1
%2
Meaning
89
%1%2 host=<Host>, user=<User>,
prio=<Priority>(W030)
W: WebView session, V: Session-less
video client, N: Session-less event client
+: Connect, -: Disconnect
The camera server client was
connected or disconnected.
%1= host=<Host>, user=<User>,
video=<Number of frames> (W031)
W: WebView session, V: Session-less
video client
When a client disconnected, the total
data that was sent to the client is
displayed in number of frames.
Authentication failed, IP: <IP address>
(W103)
Authentication failed.
%1 audio. (B001)
starting | stopping
The audio server started/stopped.
%1 unusual request[%2] (B101)
Client host IP address
Unusual type (400 | 404)
Refused the request due to command
error (400) and parameter error (404).