Alienware Area-51 m5500 User Manual page 58

6. Locate and remove the 4 Screw B's from the HDD module.
Remove the upper and lower metal cases.
7. Re-attach the metal cases to the new hard drive and tighten the
4 Screw B's. Note that the green PC board of the hard disk drive is
facing up.
8. Re-attach the HDD module to the HDD connector.
9. Put the HDD cover back and re-attach Screw A.
Congratulations! You have now completed the hard drive upgrade.
4-4
chapter 4 upgrading your computer