Table of Contents
Advertisement
Thru Zero Flanger
A Flange effect using two delay lines (per stereo side) to emulate the
classic flange effect produced using two analog tape machines. Because
there are two delay lines in constant motion, the delay time can fall
through zero to become negative. This has a unique sound that can't be
replicated with a standard, single-delay flanger.
A . Feedback
This is the amount of the flanger output added back into the input
to produce a deeper effect.
Range:
0 - 100%
B . Manual Delay
This is the base delay time that is modulated by the LFO to create
the Flange effect. It determines the frequencies of the notches and
peaks.
Range:
0 – 100%
C . LFO Rate
This is the rate of the Low Frequency Oscillator.
Range:
0.010Hz – 4.800Hz, or 1/16 to 16 if Tempo Sync is
enabled
D . LFO Depth
This adjusts the magnitude of the LFO modulation. When set to
0%, the LFO has no effect on the notch frequencies.
Range:
0 – 100%
E . LFO Shape
This selects between the two LFO shapes.
Range:
Tri, Sin
F . Tempo Sync
This selects whether the LFO rate is synchronized to the System
Tempo. When enabled, the LFO Rate parameter is displayed as a
multiple of the Tempo.
Range:
On, Off
7
Effects
85
Advertisement
Table of Contents
