Table of Contents
Advertisement
Pre Filter Mix [edit]: Osc 3 Balance
Page:
3
Soft Button:
3
Range:
0%/100% – 100%/0%
Default:
50%/50%
This parameter controls the filter balance of Oscillator 3 in the Pre Filter
Mix.
Pre Filter Mix [edit]: Ring Mod Balance
Page:
4
Soft Button:
1
Range:
0%/100% – 100%/0%
Default:
50%/50%
This parameter controls the filter balance of the Ring Mod source in the
Pre Filter Mix.
Pre Filter Mix [edit]: External Input Balance
Page:
4
Soft Button:
2
Range:
100% f1 – 100% f2
Default:
center
This parameter controls the filter balance of the External Input source in
the Pre Filter Mix. However, since the External Input is a stereo source,
this balance works a little differently. When the balance is exactly in the
middle, the left channel of the external input is sent to Filter 1, and the
right channel is sent to Filter 2. As the parameter is increased, the left
external input is shifted towards Filter 2, until at the maximum setting of
100% f2, both external audio sources are sent only to Filter 2.
Conversely, decrementing the parameter shifts the right signal toward
Filter 1, and at the 100% f1 setting, both external audio sources are sent
only to Filter 1.
Pre Filter Mix [edit]: Noise Balance
Page:
4
Soft Button:
3
Range:
0%/100% – 100%/0%
Default:
50%/50%
This parameter controls the filter balance of the Noise source in the Pre
Filter Mix.
Program Parameters
5
59
Advertisement
Table of Contents
