Table of Contents
Advertisement
String Phaser
This effect is based on the phaser built into a classic analog string
synthesizer. It has 14 stages, and uses combination of positive and
negative feedback to produce a rich and complex sound.
A . Feedback
This is the amount of the phaser output added back into the input to
produce a deeper effect.
Range:
0 - 100%
B . Notch Freq
This is the frequency of the first (lowest) notch, un-modulated by
the LFO.
Range:
0 – 100%
C . LFO Rate
This is the rate of the Low Frequency Oscillator.
Range:
0.010Hz – 4.800Hz, or 1/16 to 16 if Tempo Sync is
enabled
D . LFO Depth
This adjusts the magnitude of the LFO modulation. When set to
0%, the LFO has no effect on the notch frequencies.
Range:
0 – 100%
E . LFO Shape
This selects between the two LFO shapes.
Range:
Tri, Sin
F . Tempo Sync
This selects whether the LFO rate is synchronized to the System
Tempo. When enabled, the LFO Rate parameter is displayed as a
multiple of the Tempo.
Range:
On, Off
7
Effects
83
Advertisement
Table of Contents
