Table of Contents
Advertisement
7
Effects
Theta Flanger
The Theta Flanger is a combination of phaser and flanger effects. The
input is filtered through a 32-stage phaser, and then fed to the input of a
flanger. The sound is very interesting and musical.
A . Feedback
This is the amount of the flanger output added back into the input
to produce a deeper effect.
Range:
B . Manual Delay
This is the base delay time that is modulated by the LFO to create
the Flange effect. It determines the frequencies of the notches and
peaks.
Range:
C . LFO Rate
This is the rate of the Low Frequency Oscillator.
Range:
enabled
D . LFO Depth
This adjusts the magnitude of the LFO modulation. When set to
0%, the LFO has no effect on the notch frequencies.
Range:
E . LFO Shape
This selects between the two LFO shapes.
Range:
F . Tempo Sync
This selects whether the LFO rate is synchronized to the System
Tempo. When enabled, the LFO Rate parameter is displayed as a
multiple of the Tempo.
Range:
84
0 - 100%
0 – 100%
0.010Hz – 4.800Hz, or 1/16 to 16 if Tempo Sync is
0 – 100%
Tri, Sin
On, Off
Advertisement
Table of Contents
