Alesis Micron Reference Manual page 85

Plate Reverb
This reverb algorithm mimics the behavior of plate reverb units.
A plate reverb is a large (roughly 3 foot x 6 foot) and thin (roughly
1/64 inch) steel sheet, with a driver attached at its center to
th
vibrate it and contact microphones attached further away to pick
up the resulting vibration.
Plate reverb is the classic reverb sound heard on recordings up
until the early 1980's, when digital reverbs hit the scene.
The parameters for the plate reverb are the same as those for the
hall reverb.
Room Reverb
This reverb is very much like hall reverb, but it emulates a smaller
space.
Again, the parameters for this reverb are identical to those for the
hall and plate reverbs.
6
Programs
83