Add - Alesis Micron Reference Manual

5
Setups
g. Split?
Split allows you to create a new beat by splitting the key range of
the current part. After the split, one beat will use the keys below
the split point, and the other beat will use the keys above. The two
beats will otherwise be identical.
If you choose to split a beat, the Micron will prompt you to select
the key on the keyboard where the split should occur. To select
the split point, turn the control knob or play a key. You can use
the [octave] buttons if your desired split point is outside of the
current key range.
The newly-created beat will be assigned the next letter after the
current part's letter. All subsequent beat letters will be
incremented by one.
h. Layer?
Choose layer to duplicate the current beat.
The newly-created beat will be assigned the next letter after the
current beat's letter. All subsequent beat letters will be
incremented by one.
i. Remove?
Choose remove to remove the current beat. All subsequent beats
will be re-lettered accordingly.

5. Add?

After turning the control knob past all of the current beats, you
will be able to add a beat. At the add screen, push the control
knob to add a new beat.
Note that adding beats using the add feature always adds them after
the last beat. To insert a beat in between others, use the split or
layer functions from within the beat editing screens.
51