Alesis Micron Reference Manual page 78

6
Programs
String Phaser
This effect is based on the phaser built into a classic analog string
synthesizer. It has 14 stages, and uses combination of positive and
negative feedback to produce a rich and complex sound.
A. Feedback
This is the amount of the phaser output added back
into the input to produce a deeper effect.
Range:
B. Notch Frequency
This is the frequency of the first (lowest) notch, un-
modulated by the LFO.
Range:
C. LFO Rate
This is the rate of the Low Frequency Oscillator.
Range:
whole notes) to 16 (64
enabled
D. LFO Depth
This adjusts the magnitude of the LFO modulation.
When set to 0%, the LFO has no effect on the
notch frequencies.
Range:
E. LFO Shape
This selects between the two LFO shapes.
Range:
F. Tempo Sync
This selects whether the LFO rate is synchronized
to the Micron's tempo. When "follow tempo" is
selected, the LFO Rate parameter is displayed as a
multiple of the Tempo.
Range:
76
0 - 100%
0 – 100%
0.010Hz – 4.800Hz, or 1/16 (4
note) if Tempo Sync is
th
0 – 100%
sine wave, triangle wave
fixed rate, follow tempo