Double Frame Setup - Siemens SIPLUS HCS Operating Instructions Manual

Installation/mounting

5.8 Double frame setup

5.8 Double frame setup
The following describes how to set up a double frame.
Modifications to the lower frame:
1. Release retaining clip on the right-hand (CIM) side by pressing on the interlock.
2. Feed the ribbon cable through the opening to the back.
3. By releasing and setting the ribbon cable clips, pull the ribbon cable to the left and secure
it.
4. Fold the ribbon cable upward and secure it with the retaining clip that was removed from
the right-hand side.
Image 5-8
On the upper frame, fold the ribbon cable back and insert it into the plug connector. To
secure it, use the spare retaining clip from the top frame.
Image 5-9
44
Lower frame
Double frame completed
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200