Service and maintenance
12.5 Replacing the Power Output Module (POM)
12.5
Replacing the Power Output Module (POM)
Requirements
● The AC power supply is disconnected from the supply at the mounting location of the
device and secured against switching on again.
● The 24 V DC supply voltage is disconnected.
Tool
● You will need a Torx T8 screwdriver.
Preparations
Remove all connectors from the POM before dismantling the POM.
Note
To unlock, press down the two levers on the sides of the plug connectors.
120
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200