Direct Digital Synthesis Using the Control Utility
NOTE
A spectrum analyzer is required to display the waveform.
Configuring the Equipment
1. Connect a 10 MHz reference from the spectrum analyzer to the AWG
2. Connect the channel 1 positive (+) output to the spectrum analyzer RF
Selecting the DDS Option
1. Open the Control Utility by double-clicking the icon on the desktop.
2. In the DDS Session Dialog box, select Yes.
Configuring the Signal Conditioning Path
1. Select the Output tab and connect a single-ended signal conditioning
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
front panel connector. If you are using a PXI chassis, use the backplane
10MHz reference.
input connector.
path to CH1 OUT (+) (click on the node that you want to connect).
The connection will automatically enable differential mode. Click on the
Direct Digital Synthesis Option 330
Direct Digital Synthesis
91