Configuring The Ni Mxi-4 System - Agilent Technologies N6030A Series User Manual

Troubleshooting
NI MXI-4 Link
10. Reboot the PC.
11. Verify that Plug&Play loads the NI driver, the N6030A driver, and
recognizes the MXI-4 card.
If you are still experiencing problems, refer to
System.

Configuring the NI MXI-4 System

1. Open the NI Measurement and Automation Explorer.
2. An entry will appear in the tree called IVI Drivers.
It is important to work from the bottom of the tree and move upwards.
This ensures that the inheritances are clearly established.
3. Expand IVI Drivers. (click the plus sign)
4. Expand the Advanced folder.
5. Right-click the Hardware Assets tab, select Create New and enter a
106
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configuring the NI MXI-4
Chapter 6