Basic Operation - Agilent Technologies N6030A Series User Manual

2 Basic Operation

This chapter guides you through the basic operation of the AWG. Prior to
following these procedures, the N6030A Series module must be installed in
a CompactPCI or PXI platform chassis and the N6030A Series software
installed on the controller or PC with the installed MXI-4 PCI card. Refer to
"Getting Started" on page 16 for complete instructions on how to complete
these tasks.
Using the Graphical User Interface
Using the Programmatic Interfaces
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Generating a Single Tone Signal
Generating a Multi-tone Signal
Creating and Playing a Sequence
Synchronizing Two N6030A Series Modules
IVI-C Driver Functionality
MATLAB Interface 40
MATLAB Example 1, Creating and Playing a Waveform
MATLAB Example 2, Synchronizing Two AWG Modules
C/C++ Example Program
28
28
32
33
36
40
40
53
41
45
27