Ni Mxi-4 Link; If You Encounter Problems Configuring The Ni Mxi-4 Link - Agilent Technologies N6030A Series User Manual

NI MXI-4 Link

If You Encounter Problems Configuring the NI MXI-4 Link

1. Uninstall the N6030A Driver. (from Administrator mode)
2. Uninstall the software
3. Shut down the PC, power off the chassis, remove the cable from the
4. Re-boot the PC and make sure all the software listed above was removed.
5. Go to:
6. Install the NI software without the MXI-4 card in the PC.
7. Install the N6030A software from the N6030A CD.
8. Shut down the PC, install the MXI-4 card and attach the cable.
9. Power on the chassis.
Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Right-click My Computer > Properties > Hardware > Device
Manager...
Expand Agilent Technologies Test & Measurement Devices
Right-click on Agilent Technologies N6030A and select Uninstall
Go to: Start > Settings > Control Panel
Double-click Add or Remove Programs
Select Agilent N603x Software Package, select Remove.
Select Windows Driver Package-Agilent Technologies Agilent
N6030A Device Driver, select Remove.
Select IVI Shared Components, select Remove.
Select National Instruments Software, select Remove.
MXI-4 card, and remove the MXI-4 card from the PC.
Download the IVI Compliance Package, which contains the IVI Engine
and the IVI Shared Components.
http://www.ni.com/
Search on ivi compliance package version 2.2.
Select IVI Compliance Package Version 2.2 for Windows
2000//NT/XP-HWDRIVER-Support-National
Follow the instructions for the Download Process at the bottom of
the page.
Troubleshooting
NI MXI-4 Link
105