Chapter 11 Storage And Load; Setting Storage And Load; Waveform Storage And Load - UNI-T UPO3000E Series User Manual

The Multipurpose knob can be used to adjust the horizontal cursor AY on the
screen, press the Multipurpose knob to switch to cursor BY, the adjustment
method of cursor BY is the same as AY.
Press mode to select tracking, adjust the Multipurpose knob and the cursor
AY and BY will move simultaneously.
The upper left corner of the display area shows the cursor measurement
information: AY, BY: Voltage values represented by the current positions of
cursor AY and BY. BY - AY: Voltage difference between two cursors.

Chapter 11 Storage and Load

With the storage function, you can save the oscilloscope's settings, waveforms,
and screen images to the oscilloscope or external USB storage devices, and
load the saved settings or waveforms anytime. Press the STORAGE key to
enter the storage function setting interface.
Note: For the external USB storage device, only supports FAT format, the
NTFS format is not compatible.

11.1 Setting Storage and Load

Press STORAGE type, select setting to enter the setting storage menu.
Setting Storage Menu
Options
Functions
Type Setting
Press save to save the settings to the
DSO
oscilloscope.
Disk
Press save to save the settings to an
USB
external USB storage device.
Descriptions
Filename can be chosen with the Multipurpose
knob. Names can be chosen from set001,
Filename
set002, ...., set255
Saves settings to a specified storage location.
Save
Loads the previously saved settings in the specified
memory location to return the oscilloscope to
Load
the previously saved setting state.

11.2 Waveform Storage and Load

Press STORAGE type, select waveform to enter the waveform storage
menu.
Waveform Storage Menu
Options
Functions
Type
Waveform
Set which channel waveform to be saved.
Source
CH3, CH4
Press save to save the waveforms to
DSO
the oscilloscope.
Press save to save the waveforms to
USB
an external USB storage device.
Disk
When save is pressed, the waveform will be
saved to an external USB storage device in .
USB CSV
csv format. This format can be opened on the
PC directly through software such as Excel.
Filename can be chosen with the Multipurpose
Filename knob. Names can be chosen from wav001,
wav002, ...., wav255
Saves waveforms to a specified storage location.
Save
After the waveform is saved, you can select the REF key on the vertical
control area to enter the REF waveform load menu.
Descriptions
48