Waveform Recording - UNI-T UPO3000E Series User Manual

Subnet Mask:
The format of the subnet mask is nnn.nnn.nnn.nnn, the nnn range is from 0
to 255. It is recommended that you consult your network administrator for
an available subnet mask.
Press subnet mask to enter the subnet mask setting menu. When the access
mode is manual, set the subnet mask by adjusting the Multipurpose knob.
When the access mode is automatic, you can only view the subnet mask.
RTC Setting:
Press UTILITY PgDn RTC setting to enter the date and time setting
menu. Adjust the digits by Multipurpose knob, after the first digit is adjusted,
press the Multipurpose knob and the cursor will jump to the second digit, the
adjustment method is similar to the first digit, the latter digit and so on. After
all adjustments, press OK to save the settings.

12.2 Waveform Recording

Press UTILITY waveform recording to enter its menu.
Setting:
Press record operation, select setting to make parameter settings for waveform
recording. You can also press REC SET to quickly enter the recording setting
interface.
Recording Interval:
Set the interval between each frame of the waveform recording.
Press the recording interval key and adjust the Multipurpose knob (shuttle
knob or numeric keypad) to set.
End Frame:
Press the end frame key and adjust the Multipurpose knob (shuttle knob or
numeric keypad) to set that the waveform recording will automatically stop
recording when it reaches this frame.
51
Playback Delay:
Set the interval time between each frame during the waveform playback.
Press playback delay, and adjust the Multipurpose knob (shuttle knob or
numeric keypad) to set.
Max Frame Size:
Displays the maximum number of frames that can be recorded in the current
situation (The maximum number of frames varies based on the current
memory depth).
Operate:
Press recording operation, select operate to enter the operation interface.
Record:
Press record to start recording. You can also press
recording.
Stop:
Press stop to stop the waveform recording. You can also press
recording.
Play:
Press play and the waveform starts playing back, you can also press
directly to start playback, press this button again to pause. Adjust the
Multipurpose knob (shuttle knob or numeric keypad) to jump to the specified
number of frames.
directly to start
to stop