Table of Contents
Advertisement
Appendix 1: ESBEND 90°
18 | Linear flue installation guide 13541-A 01-20
Outer plastic rated to 80 °C
Rated to 200 °C
Rated to 200 °C
If installed incorrectly there is potential for the outer bend to
overheat. The spacers are mandatory and required for correct
alignment of the flue components when bends are used. When
fitted correctly the inner and outer pipes of the ESBEND will be
self centering.
The black spacer comes with the ESPIPE900.
Outer plastic rated to 60 °C
Advertisement
Table of Contents
