Power On/Off; Taking And Printing A Photo; Viewfinder - Canon ivy CLIQ 2 User Manual

1
Press and hold the Power button
the LED indicator light turns on.
2
When the LED indicator turns to a steady
white , the device is ready to Use.
3
Press and hold the Power button
turn off the device.
AUTO POWER OFF
• When the device is idle for about 5 minutes, it will automatically power off.
User can resume the device by pressing the Power button again.
1
Hold the device, confirm the desired composition
of the image.
2
Press the Shutter button
The camera will automatically trigger the flash if it
is necessary for the lighting conditions.
3
The photo will be printed out immediately after
taking the photo, if paper is inserted . The device
can hold up to around 10 images at a time to print,
it depends on SD card* capacity.
* Print queue will be cleared once the device is
powered off and cannot be resumed.
* If no SD card is inserted, the device can hold up to 3 images at a time to print.
4
User can take photos with the device even with no paper if SD card is inserted,
photos will be saved in SD card.
Compose an image with the frame mark in the viewfinder.
OPERATIONS

POWER ON/OFF

until
to

TAKING AND PRINTING A PHOTO

to take a photo.

VIEWFINDER

2 X 3 Frame Mark
for normal shooting
at 3.3ft -
2 x 3
∞
10