Table of Contents
Advertisement
Quick Links
CDI-M186-010
XXXXXX
© 2005 CANON INC.
DPUG7
PRINTED IN JAPAN
IMPRIMÉ AU JAPON
Direct Print User Guide
Guide d'utilisation de l'impression directe
Guía del usuario de impresión directa
You don't even need a computer !
Just connect your camera to your printer and print
Vous n'avez pas besoin d'ordinateur !
Imprimez en raccordant directement l'appareil photo à
l'imprimante
¡No necesita un ordenador!
Simplemente conecte la cámara a la impresora e
imprima
Advertisement
Table of Contents
Related Manuals for Canon CDI-M186-010
Summary of Contents for Canon CDI-M186-010
- Page 1 CDI-M186-010 XXXXXX © 2005 CANON INC. DPUG7 Direct Print User Guide Guide d'utilisation de l'impression directe Guía del usuario de impresión directa You don’t even need a computer ! Just connect your camera to your printer and print Vous n'avez pas besoin d'ordinateur ! Imprimez en raccordant directement l'appareil photo à...
- Page 2 • For instructions on camera and printer connection methods, please refer to page 8. Icons displayed in the camera's LCD monitor • If one of the aforementioned icons does not appear, the connected printer cannot be used. • When the printer is ready for printing, the button blinks during printing.
- Page 3 SELPHY DS series Non-Canon printers* SELPHY CP series Bubble Jet printers * Please also refer to the user guide that came with your printer. Read the page below. Refer to the sections indicated Page 10 " Printing with SELPHY CP Series Printers using PictBridge"...
- Page 4 Canon. • Canon reserves the right to change the specifications of the hardware described herein at any time without prior notice.
-
Page 5: Table Of Contents
PictBridge....... . 7 Connecting the Camera to the Printer....8 Disconnecting the Camera and the Printer. - Page 6 Printing with SELPHY CP Series Printers using Canon Direct Print....... . . 48 Printing .
- Page 7 PictBridge ......68 SELPHY CP Series Printers using Canon Direct Print...
-
Page 8: Direct Print
Image selection and printing is operated from the camera. Various Printing Operations Can Be Performed* Multiple pictures can be printed at once. (DPOF print setting*) * Some settings may not be selectable for Non-Canon printers. Prints to cover the entire surface of the paper. -
Page 9: You Can Also Perform The Following Printing Operations
Movie frames can be extracted at fairly regular intervals and printed on a single sheet of paper. (Movie print (p. 23 or p. 58)) * Depending on the printer used, the print size may be fixed before printing. Using Canon Printers (PIXMA series/SELPHY series) with PictBridge... -
Page 10: Connecting The Camera To The Printer
Connecting the Camera to the Printer Connect the camera to the printer. For instructions on printer and camera operation methods, refer to their respective user guides. Set one of the following into the camera. • Compact power adapter (sold separately) •... -
Page 11: Disconnecting The Camera And The Printer
Disconnecting the Camera and the Printer Detach the cable from the printer. Pull out the cable while holding the connector plug. Do not pull out by the cable. Turn the camera’s power off. Detach the cable from the camera. Pull out the cable while holding the connector plug. Do not... -
Page 12: Printing With Selphy Cp Series Printers Using Pictbridge
Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. -
Page 13: Print After Changing The Print Settings
LCD monitor. displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print (p. 48). Display the images you wish to print and press the SET button. The print order screen appears. Depending on the printer model, some setting options may not display. - Page 14 • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Printing Errors • An error message appears if an error occurs for some reason during the printing process.
-
Page 15: Selecting Print Settings
Please also refer to the user guide that came with your printer. Default Setting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. -
Page 16: Setting The Print Effect
Uses the camera’s shooting information to deliver beautiful prints. Prints without any effects. Default Print settings differ according to your printer model. Setting the Number of Copies Select [ ] and choose a print effect option. Select [ ] and set the number of prints. -
Page 17: Setting The Printing Area (Trimming)
Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 17) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. Trimming Frame Select [Trimming] and press the SET button. - Page 18 Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
-
Page 19: Selecting The Paper Settings
• The paper size and page layout settings determine the shape of the trimming frame. • Please use the LCD monitor to set the trimming settings. The trimming frame may not display correctly on a TV screen. Selecting the Paper Settings Select [Paper Settings] and press the SET button. - Page 20 Select a layout. The following layout can be selected. Default Print settings differ according to your printer model. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up Prints 2, 4 or 8 images on a single sheet of paper (p.
-
Page 21: Printing Multiple Images On A Sheet Of Paper
Printing Multiple Images on a Sheet of Paper Selecting [N-up] in the layout setting (p. 18) will allow you to specify the following layout settings. 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper. -
Page 22: Printing By Specifying The Print Size (Id Photo Print)
Refer to the party (organization) or administration requiring the photo. The print size can be specified for only L (Large) resolution images in the camera connected to the printer. Select [ID Photo], then press the SET button. - Page 23 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.8 inch 2.0 inch Trimming Frame • The shape of the trimming frame varies depending on the specified print size. •...
-
Page 24: Printing Images In The Fixed Size
Printing Images in the Fixed Size Selecting [Fixed size] in the layout setting (p. 18) will allow you to print by specifying the print size of the image on a sheet of paper. Select a layout and press the SET button. This ends the paper settings operations. -
Page 25: Printing Movies (Movie Print)
Printing Movies (Movie Print) You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Select [Print] and press the SET button. It may not be possible to play back or print movies shot with a different camera. - Page 26 • The number of printed movie frames per sheet of paper is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) •...
-
Page 27: Printing With Dpof Print Settings
Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide. In this section, we will explain how to print several images already specified with DPOF print settings. In the [ (Play)] menu, select [Print Order] and... - Page 28 • To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print in Step 3. • When the print type is set to [Index], the [Date] and [File No.] cannot be printed at the same time.
- Page 29 Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remaining images can be printed.
-
Page 30: List Of Messages
List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions. -
Page 31: Printing With Bubble Jet Printers (Pixma Series/Selphy Ds Series) Using Pictbridge
Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. -
Page 32: Print After Changing The Print Settings
Display the images you wish to print and press the SET button. The print order screen appears. Depending on the printer model, some setting options may not display. Sets the number of copies (p. 34). Sets the trimming portion (p. 34). - Page 33 • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Printing Errors • An error message appears if an error occurs for some reason during the printing process.
-
Page 34: Selecting Print Settings
Depending on the camera model, the screens that will be displayed will vary. Moreover, available settings differ depending on the printer model (unavailable settings will not appear in the menu). For details, refer to the user guide that came with your printer. -
Page 35: Setting The Print Effect
[On] option. Prints with a noise reduction effect. VIVID+NR Prints using both the [VIVID] and [NR] options. Default Print settings differ according to your printer model. Select [ ] and choose a print effect option. -
Page 36: Setting The Number Of Copies
Setting the Number of Copies Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 37) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. - Page 37 Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
- Page 38 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
-
Page 39: Selecting The Paper Settings
18 cm, 8.5" 11" or A4, CreditCard, A3, 13" 19" or A3+ and Default. • Some sizes are not available with certain cameras and printer models. The paper type setting screen appears. * Paper sizes vary according to region. 7" or... - Page 40 Fast Photo Prints on Photo Paper Pro paper*. Default Print settings differ according to your printer model. * Canon brand paper • You can select [Plain] depending on the printer. However, you cannot select [Borderless] in the page layout screen when [Plain] is selected.
-
Page 41: Printing Multiple Images On A Sheet Of Paper
Printing Multiple Images on a Sheet of Paper • Selecting [4" x 6"] in the paper size setting (p. 37) will allow you to specify the following layout settings. 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper. - Page 42 • When [Plain] is selected in the camera's [Paper Type] (cannot be selected depending on the connected printer model) • With printers equipped with an operation panel, when [Plain] is selected with the printer and [Default] is selected in the camera's [Paper Type].
-
Page 43: Printing With Dpof Print Settings
Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide. In this section, we will explain how to print several images already specified with DPOF print settings. In the [ (Play)] menu, select [Print Order] and... - Page 44 Step 2 to [On]. You cannot set the date in Step 3. • When the print type is set to [Index], both the [Date] and [File No.] cannot be printed depending on the printer. • When the print type is set to [Standard], the [File No.] cannot be printed.
- Page 45 Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remaining images can be printed.
-
Page 46: List Of Messages
No Ink Low ink level Waste tank full Ink Error There is no paper set in the printer. If you are using a printer equipped with a photo paper cassette, specify the paper feed location using the Paper Feed switch. - Page 47 If the error persists, please Printer error consult the dealer where you purchased your printer or your nearest Canon Customer Support center (listed in the Contact List provided with the printer). The printer is in use now. The printer automatically...
- Page 48 Check that the correct paper size is selected. If this error message appears even when the correct paper size is set, turn off the printer, then turn it on again. If the error persists, please consult the dealer where you purchased your printer or your nearest Canon Customer Support center (listed in the Contact List provided with the printer).
-
Page 49: Printing With Non-Canon, Pictbridge Compliant Printers
However, the following menu options cannot be set. • Print Effect (p. 33):[VIVID], [NR], [VIVID+NR] • Paper Size (p. 37):[A3+/13 x 19] and [5" x 7"] or [13 x 18cm] Please also refer to the user guide that came with your printer. Make sure that displays in the upper left corner of the LCD monitor. -
Page 50: Printing With Selphy Cp Series Printers Using
Printing with SELPHY CP Series Printers using Canon Direct Print Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Display the images you wish to print and press the button. - Page 51 Selecting the Number of Copies (p. 50). Print Order Screen Select print settings as required. Select [Print] and press the SET button. If you press the MENU button, the display will revert to the standard playback mode and printing will not take place. •...
-
Page 52: Selecting Print Settings
Selecting Print Settings Selecting the Number of Copies In the print order screen, select [ number of prints. 1 to 99 copies can be set. Setting the Print Style (Image, Borders and Date) You can select from among the following print styles. Standard Image Multiple*... - Page 53 Print Area Frame If you select an image which has had the shooting date embedded in it using a camera with the Postcard Print mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image.
-
Page 54: Setting The Printing Area (Trimming)
Setting the Printing Area (Trimming) You can specify which portion of an image gets printed. Please set the Print Style (Image, Borders and Date) before setting the trimming settings. If the print style is changed after having made the trimming settings, you must select the settings again. Trimming Frame In the print order screen, select [Trimming] and press... - Page 55 Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
- Page 56 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
-
Page 57: Printing By Specifying The Print Size (Id Photo Print)
Refer to the party (organization) or administration requiring the photo. The print size can be specified for only L (Large) resolution images in the camera connected to the printer. In the print order screen, select [Style] and press the SET button. - Page 58 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.8 inch 2.0 inch Trimming Frame Press the SET button to close the setting menu. Selectable combination : Available print size Short Side 25 mm 30 mm...
- Page 59 • The print size setting only applies to one image. • The print size setting is canceled with the following operations: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
-
Page 60: Printing Movies (Movie Print)
Printing Movies (Movie Print) You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Select [Print] and press the SET button. Select the movie you want to print, then press the SET button. • If you press the instead of the SET button, movie print begins. - Page 61 It may not be possible to play back or print movies shot with a different camera. • The number of printed movie frames per sheet of paper is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) •...
-
Page 62: Printing With Dpof Print Settings
Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide. In this section, we will explain how to print several images already specified with DPOF print settings. In the [ (Play)] menu, select [Print Order] and... - Page 63 • To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print with the [Style] menu in Step 3. • When the print type is set to [Index], the [Date] cannot be printed.
- Page 64 Restarting Printing • Select [Resume] and press the SET button. The remaining images can be printed. • Printing cannot be restarted under the following circumstances. • If the print settings have been changed before restarting. • If the image for which the print settings were set has been deleted before restarting.
-
Page 65: List Of Messages
List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) • Please refer to the printer’s user guide for solutions. -
Page 66: Printing
Jet Printers using Jet Direct Printing After this step, follow the procedures in the section SELPHY CP Series Printers using Canon Direct Print (p. 48) to print your images. However, please note that some menus and precautions differ, as listed below. -
Page 67: Setting The Print Style
• To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Printing Errors • An error message appears if an error occurs for some reason during the printing process. -
Page 68: See Page
• The ID photo print function cannot be used. • If you select an image which has had the shooting date embedded in it using a camera with the Postcard Print mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image. -
Page 69: Settings That Can Be Set With The Camera
Settings that Can Be Set with the Camera SELPHY CP Series Printers using PictBridge (When appears on the camera’s LCD monitor during a connection ) Print Options Selectable with the Camera Date File No. Date/File No. Both Default Print Effect Default Number of Prints 1 to 99... -
Page 70: Bubble Jet Printers (Pixma Series/Selphy Ds Series) Using Pictbridge
Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge (When appears on the camera’s LCD monitor during a connection) Some settings are not available with certain cameras and printers. Print Options Selectable with the Camera Date Print Effect Number of Prints Trimming Date Default... - Page 71 Paper Size* Paper Settings Paper Type* Page Layout Paper sizes vary according to region. You can select [Plain] depending on the printer model. This option can be specified by selecting "4" x 6"" in the paper size setting. 4" 6" 5"...
-
Page 72: Selphy Cp Series Printers Using Canon Direct Print Bubble Jet Printers Using Bubble Jet Direct
SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Number of Prints 1 to 99 Image Style Paper...