Power Zooming - Canon AUTO ZOOM 814 ELECTRONIC Instructions Manual

16
Operation (1)
Holding the camera
1
Hold the handgrip with your right hand and place the forefinger on
the trigger. Focusing and zooming are done with the left hand .
• If the camera is not held firmly enough during shooting, the scenes may
look unstable and this w i ll mar your enjoyment wh i le projecting. Be
specially careful in telephoto or in zooming. It is advisable to use a firm
tripod and the Remote Switch 60 or Remote Switch 3, or to keep your
right elbow pressed firmly against your body.
2
Looking through the viewfinder
You can get every required information in the viewfinder because the
d iaphragm scale, the exposure meter needle, the exposure warning marks,
the prism screen rangefinder, and the film end caution lamp are built in it.
3
Zooming
When you rotate the zooming ring manually or push the power zoom
button, the magnification of the subject changes. Therefore, you can
compose the frame easily and you can add zooming effects to your
pictures, that is, continuous change of manification.
POWER ZOOMING
Zooming begins by pressing either of the power zoom buttons. The
magnification changes with the button "T" toward the telephoto area, and
" W" toward the wide-angle area. When you push the buttons during
shooting, zooming effects are easily obtained. The full range of zooming
t i me is about 7 to 8 seconds . .