Install the 7mm drive cage
Follow instructions in this section to install the 7mm drive cage.
About this task
Attention:
• Go over "Installation Guidelines" on page 107 to ensure that you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
•
https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1.
Make preparations for this task.
a.
If necessary, secure the two drive backplanes to the drive cage with three screws.
Figure 36. Installing the 7mm drive backplanes
b.
Install the 7mm drive cage to the x16/x16 (x8 lanes) PCIe riser with 7mm drive cage bracket.
ThinkSystem SR850 V2 Maintenance Manual
118