Applying Effects - Roland V-Drums TD-50X Reference Manual

Parameter Value
Pad Maximum
-5–0
Volume (*1)
[F4] (KIT VOL) button
Kit (Kit Volume)
Pedal HH
(Pedal HI-HAT
-INF–+6.0dB
Volume)
XStick
(XStick Volume)
HH Op/Cl Balance
-5–+5
(*1) Press the cursor [ H ] [ I ] buttons to switch between selecting
"Pad Minimum Volume" or "Pad Maximum Volume. "
MEMO
5 Pressing the [F5] (H & R) button to switch this on lets you make
simultaneous settings, such as both the head and the rim.
5 You can set the "Kit Volume" on the KIT SETTINGS screen (VOLUME
tab) as well.
5 The MIXER VOLUME and MIXER PAN settings can be copied (p. 45).

Applying Effects

Use the effects to change the volume (pad compressor) and tonal
character (pad equalizer) for each pad, or to set a maximum of three
effects to apply to the drum kit sound (multi-effects).
& For details on the parameters that can be edited, refer to "Data List"
(PDF).
1 .
Press the [MIXER] button.
2 . Press the PAGE [UP] [DOWN] buttons to display the
settings screen.
PAD EQ screen (pad equalizer)
Explanation
Maximum volume of each pad
This lets you decrease the
volume of the strongest hits
while preserving their nuances.
Use this to keep the volume
down while still maintaining
the nuances of the strongest
hits.
* This is available only for
pads that support digital
connection and for input
from the MIDI IN connector.
Drum kit volume
Pedal hi-hat volume
Cross-stick volume
Balance between open and
close volume
Lower values decrease the
volume of the hi-hat when
played while open, relative to
the volume when played while
closed. Higher values increase
the volume of the hi-hat when
played while open, relative to
the volume when played while
closed.
PAD COMP screen (pad compressor)
MFX1–3 (multi-effect)
3 .
Edit the effect settings.
Turning the effects on/off
1 . Press the [MIXER] button.
2 .
Press the PAGE [UP] [DOWN] buttons to display the
settings screen.
3 . Press the function buttons to turn the effects on/off.
Screen Button
PAD EQ screen [F4] button
PAD COMP screen
[F4] button
MFX1–3 screen
[F5] button
MEMO
You can copy the settings for the pad equalizer, pad compressor
and multi-effect (p. 45).
Customizing the Kits
Explanation
Turns the pad equalizer on/off.
Turns the pad compressor on/
off.
Turns on/off multi-effects 1–3
selected by the [R1] knob.
33